Steel Coils & Sheet

We are a reputed trader and exporter of a wide variety of stainless steel and Duplex steel strips that are manufactured using quality steel and latest technology. Designed as per the application requirements of differed industries, these stripes are available in thickness of 0.05 mm to 3.00 mm and width of 6 mm to 460 mm.

Complete range of Stainless Steel Magnetic / Non-Magnetic grade Sheets, Plates Coils.

We provide : 

  • JINDAL, SAIL, IMPORTED Matirial.
  • Cut to Size Sheets, Coils
  • Soft, 1/4 Hard, Half Hard, Full Hard
  • Mill Finish, Polished, No.8 Finish
  • 300 Series, 400 Series, Others..

Size Range

 

Inches

MM

Thickness : CR

0.01 - 0.24

0.2 - 6.0

Thickness : HR

0.24 - 4

6 - 100

Width : CR / HR *

0.10 - 78

2 - 2000

Finishes 

Dull gray matte, to bright and highly reflective. Finishes may vary with alloys, tempers, and gauges.

Tempers

Dead soft to extra hard

Edges

ROUND EDGE, SLIT EDGE, OR SQUARE EDGE can be provided as per user requirement.

Gauge and Width 
Tolerances

A.I.S.I tolerances, your special tolerances, or extra close tolerances upon request.

Products

  • Sheets of prime quality
  • Coils of reputed mills
  • Cut sizes available
  • Various Shape profiles

Services Avaiable

  • Bending
  • Polishing
  • Perforation
  • Punching

Materials

  • Stainless Steel 200, 300 & 400 series, Duplex steels.
  • Copper, Brass, Monel, Nickel
  • High Purity Aluminum and Aluminum Alloys
  • Carbon Steel CR etc.

Features

  • Standard as well as non standard sizes are available.
  • State of the art service center for your processing requirements.
  • Fabrication done on request.
  • Well protected stock yards for safety of material.

Overview

Stainless Steel Non-Magnetic grades

202,301, 304, 304L,304H, 316, 316L,316H, 310 ,321 etc.

Stainless Steel Magnetic grades

409, 409M, 410, 410S, 420, 430, 431 etc.

Non Ferrous Metals

Aluminium / Copper / Brass / Phosphor Bronze / Bronze

Special Metals

Nickel and Nickel Alloys / Inconel / Hastelloy / Monel / Titanium

 

 

MAKE : SAIL, JINDAL, IMPORTED

All standard sizes are available ex stock. Riddhi Impex can provide you with the size as required by you. Please Fill a Inquiry Form or Send us an E-Mail

 





copper
Sheets & Plates  |  Pipes  |  Bar & Wire  | Flanges  |  Pipe Fittings

» Stainless Steel Pipes & Tubes » Steel Coils and Sheet » Butt Weld Elbow » Forged Elbow » Lap Joint Flanges
» 304 Stainless Steel Pipes and Tube » Stainless Steel Plates » Butt weld Reducers » Forged Reducers » Long Weld Neck Flanges
» 304L Stainless Steel Pipes and Tubes » Alloy Steel Plates SA 387 » Butt weld Tee » Forged Tee » Orifice Flanges
» 304H Stainless Steel Pipes and Tubes » Mild Steel Plates and Carbon Steel Plates » Butt weld Stub Ends » Forged End Caps » Plate Flanges
» 310 Stainless Steel Pipes and Tubes » Abrasion and Wear Resistant Steel Plates » Butt weld Adapters » Forged Stub Ends » Slip on Flanges
» 316 Stainless Steel Pipes and Tubes » Boiler Quality Steel Plates » Butt weld Pipe Nipples » Forged Couplings » Socket Weld Flanges
» 316L Stainless Steel Pipes and Tubes   » Butt weld End Caps » Forged Plug and Bushing » Spectacle Flanges
» 316H Stainless Steel Pipes and Tubes     » Forged Boss » Threaded Flanges
» 321 Stainless Steel Pipes and Tubes     » Forged Union » Weld Neck Flanges
» 347Stainless Steel Pipes and Tubes     » Forged Steel Adapters  
» 410 Stainless Steel Pipes and Tubes     » Forged Pipe Nipples  
» Alloy Steel Pipes & Tubes        
» Mild Steel Pipes & Tubes        
» ERW Pipes & Tubes