Forged Steel Adapters

Adapters are an extremely important pipe fitting that extend or terminate pipe runs. They are used to connect dissimilar pipes. These fittings are somewhat similar to pipe couplings, with the difference that they connect pipe of different types, one of which is an IPS (Iron Pipe Size). Flex couplings sometime act like adapters. Pipe adapters may have either male or female IPS threads on one end and the opposite gender on the other end, which needs to be welded or soldered onto a smaller pipe. Adapters are used in a myriad of applications but they are typically used to connect different pipes to fixtures.

Materials used:
High quality and durable materials are used for making pipe adapters. Some of the common materials include:

  • Steel
  • Cast Iron
  • Aluminum
  • Copper
  • Polymers
  • Brass
  • Bronze etc.

Types of Pipe Adapters:
Adapters are available in various types and while different types of adapters are required for different applications. While buying adapters for pipe, the buyer should always select the right type for right application. Some of the common types of pipe adapter are:

Locking Pipe Adapter:
     These are special pipe adapters that are used to attach 6 inches pipe to drain basin of any size,      which requires a straight-line connection.

Offset Pipe Adapter:
     These pipe adapters are used to attach 8 to 10 inches single wall pipe to 9 inches, 12 inches or 18      inches pipes used for drain basins and/or low profile drains, which require an offset connection.

 

Male Pipe Adapter:
     Male pipe adapters are designed in such a way that they make minimum volume connection from the      female pipe fittings on pressure gaugesand regulators to dead volume internal fittings.

 

Female Pipe Adapter:
     These pipe adapters make a minimum volume connection from the male pipe fittings, which are usually      found in gas distribution plumbing to dead volume internal fittings.

 

Straight Thread Adapters:
     These adapters are also referred as O-ring boss fittings and they are joined on the back of the male half of the      connector against a locking surface of the female port. These adapters usually have straight threads, which do not seal      and offer resistance for service pressure. Straight threaded adapters are again divided into two categories:

Adjustable: As the name suggests, these adapters are adjustable and include fittings like elbows and      tees. Adjustable straight threaded adapters help the user to change the shape in the direction as      required, before they are tightened for assembling.

Non-adjustable: These fittings include plug or connector and they simply screw into a port and generally require no      adjustment.

Steel adapters that can be used in many different fluid conveyance applications. The variety of different steel adapters includes (but not exclusive to):

  • ors
  • sae o-ring
  • split flange
  • sae 45 degree flare
  • sae 37 degree flare (jic)
  • pipe
  • metric/bspp/bspt


Uses of pipe adapters:
Some important uses of pipe adapters are as follows:

  • Adapters are applicable in all sanitary pipes.
  • They are food grade rated.
  • They are insulated.
  • They are plated.
  • They provide high purity and excellent chemical resistance.
  • Leak-free designs in adapters can withstand high-pressure.
  • Adapters are ideal for high-vibration or side-load stressed applications.
  • They offer better flow rates.
  • They offer fewer potential leak points, thereby providing a seamless and convenient transition from piping to tubing systems.
  • In some cases, adapters eliminate the need for welded or threaded connections, which in turn save time and cost.

 

 

 





copper
Sheets & Plates  |  Pipes  |  Bar & Wire  | Flanges  |  Pipe Fittings

» Stainless Steel Pipes & Tubes » Steel Coils and Sheet » Butt Weld Elbow » Forged Elbow » Lap Joint Flanges
» 304 Stainless Steel Pipes and Tube » Stainless Steel Plates » Butt weld Reducers » Forged Reducers » Long Weld Neck Flanges
» 304L Stainless Steel Pipes and Tubes » Alloy Steel Plates SA 387 » Butt weld Tee » Forged Tee » Orifice Flanges
» 304H Stainless Steel Pipes and Tubes » Mild Steel Plates and Carbon Steel Plates » Butt weld Stub Ends » Forged End Caps » Plate Flanges
» 310 Stainless Steel Pipes and Tubes » Abrasion and Wear Resistant Steel Plates » Butt weld Adapters » Forged Stub Ends » Slip on Flanges
» 316 Stainless Steel Pipes and Tubes » Boiler Quality Steel Plates » Butt weld Pipe Nipples » Forged Couplings » Socket Weld Flanges
» 316L Stainless Steel Pipes and Tubes   » Butt weld End Caps » Forged Plug and Bushing » Spectacle Flanges
» 316H Stainless Steel Pipes and Tubes     » Forged Boss » Threaded Flanges
» 321 Stainless Steel Pipes and Tubes     » Forged Union » Weld Neck Flanges
» 347Stainless Steel Pipes and Tubes     » Forged Steel Adapters  
» 410 Stainless Steel Pipes and Tubes     » Forged Pipe Nipples  
» Alloy Steel Pipes & Tubes        
» Mild Steel Pipes & Tubes        
» ERW Pipes & Tubes