Stainless Steel Plates

Stainless steel plates is often referred to as "corrosion-resistant steel" – it does not stain, corrode or rust as easily as normal carbon steel. It would however be misleading to say it is corrosion-proof. It differs significantly from standard carbon steel due to the amount of chromium present, which limits surface corrosion unlike carbon steel which will rust when exposed to air and any moisture in the atmosphere. Due to its anti-oxidation qualities, stainless steel is often a popular solution. 

Where low maintenance and corrosion resistance is required, stainless steel plates are a natural choice and are used in a diverse range of applications from modern architecture for cladding or fascias, to the food hygiene industry due to its anti-bacterial qualities. Riddhi Impex supplies stainless steel in a wide variety of grades and aesthetic finishes. There are many options available - for example adding carbon during the forming process will make the stainless steel more durable and stronger too. We can supply stainless steel in coils, sheets, plates and bars and ship the material worldwide. 

Example Industrial Uses:

  • Chemical and fuel tankers
  • Chemical and petrochemical plants
  • Food processing and pharmaceutical industries where clean environments are required
  • Construction, modern architecture

As a major stainless steel supplier, Riddhi Impex supply services include... 

  • major stockholding
  • global shipping
  • variety of finishes available
  • heat resistant qualities when specified
  • quick turnaround
  • accurate 'in-house' cutting and profiling service
  • high quality steel from major European steel mills

Range : 0.5 mm To 150 mm thick in 1000 mm TO 2000 mm width & 2500 mm to 6000 mm Length available with NACE MR 01-75.

Form
Foils, Shim Sheet, Rolls, Perforated Sheet, Chequered Plate. 

Finish

  • 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
  • Hot rolled plate (HR),
  • Cold rolled sheet (CR)

Stainless Steel Plates
Stainless Steel Plate And Sheets ASTM / ASME SA 240 GR. TP 304 , 304L , 304H, 309S , 309H , 310S, 310H , 316 , 316L, 316H , 316Ti , 317L , 321 , 321H , 347 , 347 H , 409, 410S, 420, 430, 904L

Duplex Steel plates
Duplex Steel plates and Sheets UNS NO.S31803, UNS NO.S32205 / SAF 2205

VALUE ADDED SERVICES

  • Cutting
  • Bending
  • Forging
  • Rolling
  • Heat Treatment
  • Minor Fabrication

TEST CERTIFICATE 
Mill Test Certificate as per EN 10204 / 3.1B

 





copper
Sheets & Plates  |  Pipes  |  Bar & Wire  | Flanges  |  Pipe Fittings

» Stainless Steel Pipes & Tubes » Steel Coils and Sheet » Butt Weld Elbow » Forged Elbow » Lap Joint Flanges
» 304 Stainless Steel Pipes and Tube » Stainless Steel Plates » Butt weld Reducers » Forged Reducers » Long Weld Neck Flanges
» 304L Stainless Steel Pipes and Tubes » Alloy Steel Plates SA 387 » Butt weld Tee » Forged Tee » Orifice Flanges
» 304H Stainless Steel Pipes and Tubes » Mild Steel Plates and Carbon Steel Plates » Butt weld Stub Ends » Forged End Caps » Plate Flanges
» 310 Stainless Steel Pipes and Tubes » Abrasion and Wear Resistant Steel Plates » Butt weld Adapters » Forged Stub Ends » Slip on Flanges
» 316 Stainless Steel Pipes and Tubes » Boiler Quality Steel Plates » Butt weld Pipe Nipples » Forged Couplings » Socket Weld Flanges
» 316L Stainless Steel Pipes and Tubes   » Butt weld End Caps » Forged Plug and Bushing » Spectacle Flanges
» 316H Stainless Steel Pipes and Tubes     » Forged Boss » Threaded Flanges
» 321 Stainless Steel Pipes and Tubes     » Forged Union » Weld Neck Flanges
» 347Stainless Steel Pipes and Tubes     » Forged Steel Adapters  
» 410 Stainless Steel Pipes and Tubes     » Forged Pipe Nipples  
» Alloy Steel Pipes & Tubes        
» Mild Steel Pipes & Tubes        
» ERW Pipes & Tubes